BFSP66 Series Hammer Mill 1

BFSP66 Series Hammer Mill

Various types of crushed biomass raw materials can be crushed, including but not limited to forage grass, agricultural and forestry waste (wood chips, straw), animal manure, domestic waste, etc. Grinding particle size range: 0.6mm-20mm.

Key Benefits

High capacity

Two different rotor configurations are optimized, which are respectively suitable for coarse crushing and fine crushing of raw materials, effectively improving the crushing efficiency.

Stable Performance

Rigid structure, optimal hammer arrangement and dynamically balanced high-precision rotor, stable running and low noise; reversible rotation, long service life.

Friendly Operation

Patented one-step screen hold-down device and fully-open sliding doors, easy access and maintenance; CE standard design for human & machine safety.

Highlight Features

Leading design concept

With advanced design of water-drop shaped grinding chamber, the design for air supplementing in axial direction, adjustable device for screen hold-down and material retaining as well as tuning technology, destroys the material circulating layer, it is good for increasing the machine’s capacity.

Detachable sieve plate with lip

The lip plates on both sides of the new sieve pressing plate can be disassembled, which is convenient for replacement after wear, saving time and use cost.

High precision & Low noise

Fully optimized hammer arrangement and precision detection including high-precision dynamic balance make the hammer mill have lower vibration and noise, more stable operation and higher efficiency.

Wide adaptation

The gap between hammers and screen can be adjusted to suit the highly efficient grinding of different materials.

Long service life of wearing parts

The rotor which is capable of both corotation and reversion greatly increases the service life of wearing parts.

Safe & Convenient

With the movable full-size access door and interlock device ensure safety and operational convenience.

Simple & fast operation

The coupled screen hold-down mechanism makes the screen segments be replaced conveniently and reliably.

Main Structure

1. Feed guiding mechanism

2. Machine base

3. Screen hold-down mechanism

4. Access door

5. Motor

6. Upper housing

7. Rotor

Technical parameters

Model	Rotor Dia. (mm)	Width (mm)	RPM	Power (kW)	Capacity (t/h)
BFSP66×40	660	400	2970	37/45	1.5-2
BFSP66×60	660	600	2970	55/75	2.5-3
BFSP66×80	660	800	2970	75/90/110	3-5
BFSP66×100	660	1000	2970	90/110/132/160	4-7
BFSP66×125	660	1250	2970	160/200/220/250	7-11
BFSP66×150	660	1500	2970	200/250/315	9-14

Note: After chipping, the diameter of the screen hole Φ10.0, water content <15%.

High capacity

Stable Performance

Friendly Operation

Quick Links

Product Category

Contact Us